check valve

Wörterbuch

Beispiele im Kontext

  • check valve on the inlet, blending valve; black cover; brine tank; hole for control

    Rückschlagventil am Einlass, Mischen Ventil; schwarze Abdeckung; Soletank; Loch für die Steuerung

  • I was the responsible project manager of the delivered unit. With regards to your email below I would like to inform you that we used not any PSV on our skid. We used relief valve for the feed/discharge pump, which were installed in the pump. The pump is direct coupling with the motor of the centrifuge. The other marked position is a piston check valve, spring loaded. This valve is used for the recirculation line. The recirculation line will be activated if the feed valve MV1 or valve V2 closed. the buil-up pressure opens the spring loaded check valve RV1 and the oil flows back to the suction side of the pump.

    Ich war der zuständige Projektleiter des gelieferten Gerätes. In Bezug auf Ihre E-Mail unter Ich möchte Ihnen mitteilen, dass wir alle nicht verwendet PSV auf unseren Schlitten. Wir verwendeten Überdruckventil für den Vorschub / Entlade-Pumpe, die in die Pumpe eingebaut wurden. Die Pumpe ist eine direkte Kopplung mit dem Motor der Zentrifuge. Die andere markierte Stelle eine Kolben-Rückschlagventil, federbelastet. Dieses Ventil ist für die Rezirkulationsleitung verwendet. Die Rezirkulationsleitung wird aktiviert, wenn die MV1-Feed oder Ventil V2 geschlossen werden. das Gebäu-up Druck öffnet sich das federbelastete Rückschlagventil RV1 und das Öl fließt zurück an die Saugseite der Pumpe.

  • With regards to your email below I would like to inform you that we not used any PSV on our skid. We used relief valve for the feed/discharge pump, which were installed in the pump. The pump is direct coupling with the motor of the centrifuge. The other marked position is a piston check valve, spring loaded. This valve is used for the recirculation line.

    In Bezug auf Ihre E-Mail unter Ich möchte Ihnen mitteilen, dass wir alle nicht verwendet PSV auf unseren Schlitten. Wir verwendeten Überdruckventil für den Vorschub / Entlade-Pumpe, die in die Pumpe eingebaut wurden. Die Pumpe ist eine direkte Kopplung mit dem Motor der Zentrifuge. Die andere markierte Stelle eine Kolben-Rückschlagventil, federbelastet. Dieses Ventil ist für die Rezirkulationsleitung verwendet.

  • with check valve for reverse flow

    mit Rückschlagventil für zurückströmendem

  • These dimensions are not intended to cover the type of check valve having the seat angle at appoximately 45 deg to the run of the valve, or the “Underwriter Pattern,” or other patterns where large clearances are required. Globe and horizontal lift check only. The face-to-face and end-to-end dimension for Class 150 steel flanged and buttwelding end swing check valves in NPS 5 (DN 125) is 330 and in NPS 6 (DN 150) is 356. Globe, lift check, and swing check

    Diese Dimensionen sind nicht dazu gedacht, um die Art von Rückschlagventil mit den Sitzwinkel an appoximately 45 Grad auf der Flucht des Ventils oder der "Underwriter Pattern" oder andere Muster, die große Abstände erforderlich sind abzudecken. Globe und horizontaler Lift nur zu überprüfen. Die face-to-face-und End-to-End-Dimension für Class 150 Stahl-Flanschen und Anschweißenden Rückschlagklappen in NPS 5 (DN 125) ist in 330 und NPS 6 (DN 150) ist 356. Globe, heben Sie überprüfen, und schwingen Sie überprüfen

  • Double check valve

    Zwillingsrückschlagventil

  • There is not ring for check valve

    Es ist nicht Ring für Rückschlagventil

  • reverse check valve

    umgekehrte Rückschlagventil