tape head

Fixes the mass of the tape head.

Behebt die Masse des Bandes Kopf.

Fixed the mass of the tape head.

Der Fehler, der Masse der Bandkopf.

tape head

Bandkopf

CONTROLS Input Selector:Selects any one of eight program sources including Tape, Tuner 1 and 2, Auxiliary, phono 1 and 2, Tape Head 1 and 2. Each phono input has two switch positions, one for stereo, the other paralleles the stereo cartridge for Monophonic records. Mode Selector: Reverse; connects left channel to left speaker, corrects for left-right reversal of program. Stereo; (normal stereo mode selector position) left channel to left speaker, right channel to right speaker.

STEUERELEMENTE
 
 Selektor: wählt eine der acht Programm-Quellen einschließlich Tape, Tuner 1 und 2, Hilfskräfte, 1 und 2, Kopf der Band 1 und 2 Cinch-Eingang. Jedes Cinch Eingang hat zwei Positionen, eine für Stereo, die andere leles Stereo Tonabnehmer für monophone Records.
 
 Modusschalter: Rückwärts; linken Kanal zum linken Lautsprecher verbindet, für Links-rechts-Umkehr des Programms korrigiert. 
 
 Stereo; (Stellung der normalen Stereo-Modus-Selektor) linken Kanal, Linker Lautsprecher, rechter Kanal zum rechten Lautsprecher.

Input Selector:Selects any one of eight program sources including Tape, Tuner 1 and 2, Auxiliary, phono 1 and 2, Tape Head 1 and 2. Each phono input has two switch positions, one for stereo, the other paralleles the stereo cartridge for Monophonic records. Mode Selector: Reverse; connects left channel to left speaker, corrects for left-right reversal of program. Stereo; (normal stereo mode selector position) left channel to left speaker, right channel to right speaker.

Frequency Response: 20 - 20,000 Hz ±0.5 dB Distortion: Less than 0.2% at rated output, 20 -20,000 Hz Hum and Noise: High level inputs - 85 dB below rated output, Low level inputs, less than 2 microvolts at input terminals Input sensitivity and impedance: Aux, Tape, Tuner 1, Tuner 2; 0,25 volts at 470 kohm, Phono 1 and 2: 2 - 10 millivolts at 47 kohm for low output cartridge, 10 -70 millivolts 47 kohms for hi output cartridge, 0,1 volt 220 mmf in series with 47 kohms for Xtal or Ceramic Tape Head 1 and 2: 2 to millivolts 47 kohms for low output head tape Compare (Monitor):0,25 volts, 115 kohms Main Output:2,5 V with rated input 2 output jacks in parallel for each channel.

Tape head

Tonkopf